Microsoft Xbox 360 S-Video AV Cable User Manual download pdf (Page 4)

4

english

5

CONNECT YOUR S-VIDEO

AV CABLE

Use your Xbox 360 S-Video AV Cable

cable to connect your console to a

TV and an audio system.

IMPORTANT

Stationary images in video games

can “burn” into some TV screens,

creating a permanent shadow.

Consult your TV owner’s manual or

manufacturer before playing games.

To connect to TV and audio:

1 Turn off your console.

2 Connect the AV connector on the

S-video cable to the AV port on

your console.

3 Connect the S-video connector on

the S-video cable to the S-video

input on your TV. Leave the yellow

composite video connector

unconnected.

4 Connect the left and right (white

and red) audio connectors on the

S-video cable to the audio input

on your TV, receiver, or ampliﬁed

speaker system.

5 Turn on your console. From the

System area, you can change

your display settings. Select the

appropriate screen size and

resolution for your TV.

If your system (typically, a receiver

or ampliﬁer) has digital audio input,

you can connect to digital audio

rather than to the standard left and

right audio inputs. Digital audio input

should produce higher-quality sound.

To connect your console to

d

igital audio:

1 Connect the S-Video AV cable as

described in steps 1–3 of “To

connect to TV and audio.”

2 Connect your digital audio cable

(not included) to the digital audio

input on your receiver or TV and

the digital audio output on the

console end of the S-Video AV

cable connector.

3 Turn on your console. From the

System area, you can change your

audio and digital output settings.

Select the appropriate digital audio

setting for your system.

TROUBLESHOOTING

If you encounter problems, try the

possible solutions provided below.

Picture with No Sound

Make sure the video and audio

connectors are connected to the

same input group on the back of

your TV. If you’re using digital audio,

make sure the receiver is turned on

and the output is correctly set in the

Xbox Dashboard.

Sound with No Picture

Verify that the TV is turned on. Make

sure the audio and video connectors

are connected to the same input

group on the back of your TV. If

you’re using digital audio, make sure

the TV has been set to display the

input group into which the S-video

cable is plugged.

X112998501_man.indd 4 8/7/2005 4:24:05 PM

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments