Microsoft Computer Hardware Mainboard User Manual download pdf (Page 19)

configure the floppy diskette drives that you have installed.

Installing Add-on Cards

This mainboard has five 32-bit PCI (Peripheral Components Interconnect)

expansion slots, one 4xAGP slot, and one AMR slot.

4xAGP Slot The 4xAGP slot is used to install a graphics adapter that supports the

4xAGP specifications and has a 4xAGP edge connector.

PCI Slots PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

AMR Slot The AMR (Audio Modem Riser) slot is an industry standard slot that

allows for the installation of a special audio/modem riser card. Differ-

ent territories have different regulations regarding the specifications

of a modem card. You can purchase an AMR card that is approved in

your area and install it directly into the AMR slot.

Note: Before installing an add-on card, check the documentation for the card

carefully. If the card is not Plug and Play, you may have to manually con-

figure the card before installation.

Follow these instructions to install an add-on card:

1. Remove a blanking plate from the system case corresponding to the slot you

are going to use.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 41 42

No comments

Microsoft Computer Hardware Mainboard User Manual Page 19