TA61TA61POS KeyboardUser Guide
Mounting keysExchanging the KeysYou can remove each of the keycaps using the key removal deviceenclosed, pulling the key upwards.Place the key removal
Now remove this key from the key-board by pulling upwards.If the key that has been removed hasa number or character on it, you canchange the lettering
The labels are replaced as follows:➀Remove the key cap from the keyboard (see removing the key cap)and pull the transparent key cap upwards.➁The trans
TheTA61keyboardGeneralThe TA61 keyboard has a keypad with maximum 60 usable keys. Exceptfor the numeric keys (0 to 9), the C key and the 0.00 key, the
TA61 keyboard without swipecard readerKeypadKeypadIn the TA61 keypad, two keys can be combined to form a double key andfour keys to form a quadruple k
Key switchKey sw itchThe TA61 keyboard is equipped with a key switch with 6 switch positions.Switch position 0 is the basic position; switch positions
Note the following precautions when handling magnetic cards: Never allow magnetic cards to come into contact with liquids. Never bend or fold magnetic
Releasing the Cable ConnectionReleasing the Cable ConnectionNever remove a cable from a connector socket by simply pulling on thecable. Always remove
AppendixTechnical dataHousing dimensions Footprint: 280mm x 172mmHeight: 49mmCable length Standard: 1mOptional: 2m extension cablePower supply 5V +/-
Keyboard layoutKeyboard layoutC1 230567 8994Labelled key, single (fitted at the factory)Freely assignableKey with inscription (numeric keypad)Keyboard
TA61POS KeyboardUser GuideEdition April 2000
MS-DOS® and Microsoft® are registered trademarks of the Microsoft Corporation.BEETLE® is a registered trademark of the Wincor Nixdorf GmbH.Copyright ©
ContentsManufacturer’s Declaration and Approval... 1General Authorization ...
Manufacturer’s Declaration and ApprovalGeneral AuthorizationThis device fulfills the requirements of the EEC standards89/336/EEC “Electromagnetic Comp
Tested SafetyThe TA61 has been awarded the GSsymbol for “Geprüfte Sicherheit” (te-sted safety). TA61 fulfills the require-ments for ergonomy according
Protect the device from dust, moisture and heat. Take care to ensure that no foreign objects (e.g. paper clips) orliquids can get into the inside of
The set of keys contains:Key 1 for key position 1Key 2 for key positions 1 and 2Key 3 for key positions 1, 2 and 3Key 4 for key positions 1, 2, 3 and
Comments to this Manuals